The iconic CoolPro pants are back for 2026 with a host of thoughtful upgrades. Every detail has been refined to create a sleeker look, enhanced comfort, and greater safety.
Try them on and feel the difference for yourself!
An all-new armour adjustment system –
Designed to be easier to adjust and offer a high degree of adjustment—consists of two zippers, one on each side of the leg. Just pull the zippers up and access the armour which is in a pocket itself backed by 2 straps and front-facing velcro. Adjust the armour as you want, strap it down to your leg, and then just roll the pant velcro panel over it and pull the zippers down. It works easier and offers superb comfort.
Optional Accessory –
For riders who crave the ultimate in comfort, we’re thrilled to introduce suspenders as an optional accessory! Now you can enjoy that perfect fit and freedom of movement on every journey.
Suspender is available to be purchased separately.(not Included in the pacakge)
Technology:
Invista Cordura® is highly resistant to abrasion, scuffs, and tears.
Sas-Tec body protection systems CE Level 2 high-impact-resistant protectors (reusable after impact)
Protectors:
● CE Level 2 knee+leg armours
Sas-Tec Part # SC-1/06, Type B (weight 120g per side, Protectors surpass the required values of EN 1621-1:2012, level 2 by approx. 40 percent)
● CE Level 2 hip armours
Sas-Tec Part # SC-2/07, Type B (weight 65g per side, Protectors surpass the required values of EN 1621-1:2012, level 2 by approx. 40 to 50 percent)
● Tailbone armour from Sas-Tec
Sas-Tec Part # SC-1/09 (weight 70g, optimal coverage for great coccyx protection, anatomically perfectly adapted and barely noticeable)
Materials:
● Polydura 700 denier chassis with heavy-duty AeroCool 3D mesh.
● 1000 denier highly abrasion-resistant Invista Cordura on the knee zone for added durability & safety.
● Accordion stretch panels on the knees and rear offer improved flexibility and fit in the riding position
● Flexible panels for the crotch region.
● Adjustable hook-and-loop straps at the side of the waist.
● Adjustable ratchet buckle for the waist.
● Adjustable strap at calf and thigh.
● Velcro closure near the ankle.
● Long zippers on both sides for easy wearability and armour mechanism adjustment.
● Polyester back seat.
Cargo:
● Two zippered pockets that are water-resistant.
● Two large slanted cargo pockets that are very easy to access while riding.
Liners:
● High-quality thermal liner in a windproof material along with thermal filling.
● Rainproof liner that goes above the pants (standalone) with sealed seams and adjustments for easy wearability.
Wash & Care
Maintain your product in optimal condition (Textile gear – Jackets and Pants)
As motorcycle apparel differs from other sportswear, the washing and maintenance guidelines are also distinct. Just adhere to the steps below to keep your gear clean and ready for the next ride.
Important – Always refer to the washing and care label found inside your SOLACE gear before proceeding with any washing. If your gear consists of multiple layers (for example, a thermal liner), ensure to check the label on each layer. This set of instructions supersedes any other guidance provided.
Remove all the protective armours and any interior liners. Note any L/R side markings and the orientation of the armour. Take special care not to damage the armours while removing them from the gear.
Check the pockets for earplugs and other items, and then zip them closed. Also zip close the main and sleeve zippers.
Loosen the dirt with a soft-bristled brush and diluted detergent. Now is also a good time to clean those nasty spots if any. Check for areas where dirt seems to be stuck.
Immerse the jacket in a bucket of water and mix some mild liquid detergent. Let the dirt on the jacket get loose. Scrub it with a soft brush again till all the dirt washes away. Keep rinsing it with clean water. Hand washing textile gear is the safest option. We recommend using non-scented gentle liquid detergents or shampoos. Use lukewarm water for the washing process. NEVER use any fabric softeners.
Textile apparels are best dried on a cloth hanger, in shade. This ensures the colour remains steadfast for years to come and the interior lining remains good. Want it to dry faster ? Point a fan at it. Do not tumble dry or wring the gear. Do not bleach or expose to direct sunlight.
Once the gear is dry, it’s time to put armour back into their pockets. Some of our gear comes with asymmetrical armours, please do check for L and R markings before putting the armours back in while taking care not to tear or damage them.
There are no reviews yet.